Home › Titanium Bolts › Titanium Hex Bolts
Titanium hex bolts provide a lightweight and corrosion-resistant fastening solution for industrial and custom applications. Available in standard specifications and custom configurations based on your requirements.
Material — Titanium
Grades — Grade 2 / Grade 5 (Ti-6Al-4V)
Thread — Metric Coarse / Metric Fine / UNC / UNF
Supply — Standard & Custom
Titanium hex bolts are widely used where corrosion resistance, low weight and reliable fastening performance are required. TitaniumWest supplies standard and custom titanium hex bolts in different grades, thread configurations and dimensions.
Standard products can be supplied according to applicable DIN, ISO and ASME specifications, while non-standard titanium hex bolts can be manufactured according to customer drawings, samples and technical requirements.
d — Nominal Thread Diameter · P — Thread Pitch · k — Head Height · s — Width Across Flats · L — Bolt Length
| Size (d) | Pitch P (mm) | Head Height k (mm) | Width Across Flats s (mm) |
|---|---|---|---|
| M3 | 0.5 | 2.0 | 5.5 |
| M4 | 0.7 | 2.8 | 7.0 |
| M5 | 0.8 | 3.5 | 8.0 |
| M6 | 1.0 | 4.0 | 10.0 |
| M8 | 1.25 | 5.3 | 13.0 |
| M10 | 1.5 | 6.4 | 16.0 |
| M12 | 1.75 | 7.5 | 18.0 |
| M16 | 2.0 | 10.0 | 24.0 |
Dimensional requirements may vary according to the applicable standard, specification or custom drawing.
Grade 2
Grade 5 (Ti-6Al-4V)
Metric Coarse
Metric Fine
UNC
UNF
ISO 4017 — Full Thread
ISO 4014 — Partial Thread
DIN 933 — Full Thread
DIN 931 — Partial Thread
ASME B18.2.1
Small-diameter sizes including M1 and M2, as well as other custom dimensions, can be manufactured according to your requirements.
Diameter, length and other dimensions can be manufactured according to your requirements.
Metric coarse, metric fine, UNC and UNF thread configurations are available.
Bolt lengths can be produced according to standard specifications or customer requirements.
Head dimensions and special features can be customized according to drawings or application requirements.
Natural, polished and anodized finishes are available according to appearance and application requirements.
Non-standard titanium hex bolts can be manufactured according to customer drawings, samples and technical specifications.
Material Traceability
Dimensional Inspection
Material Certificates Available
Inspection Records Available
Send us your required size, titanium grade, quantity or drawing for review.
Request a Quote
