Home › Titanium Bolts › Titanium Button Head Socket Bolts
Titanium button head socket bolts feature a low-profile rounded head with an internal hex drive, providing a compact and clean fastening solution for applications where reduced head height is preferred. Available in standard specifications and custom configurations based on your requirements.
Material — Titanium
Grades — Grade 2 / Grade 5 (Ti-6Al-4V)
Thread — Metric Coarse / Metric Fine / UNC / UNF
Supply — Standard & Custom
Titanium button head socket bolts are widely used where a low-profile head, compact installation and a clean finished appearance are required. The rounded button head provides a lower head profile than standard socket head cap bolts, while the internal hex drive allows convenient installation. TitaniumWest supplies standard and custom titanium button head socket bolts in different grades, thread configurations and dimensions.
Standard products can be supplied according to applicable ISO and other relevant specifications, while non-standard titanium button head socket bolts can be manufactured according to customer drawings, samples and technical requirements.
d — Nominal Thread Diameter · P — Thread Pitch · dk — Head Diameter · k — Head Height · s — Hex Socket Size · L — Screw Length
| Size (d) | Pitch P (mm) | Head Diameter dk max (mm) | Head Height k max (mm) | Hex Socket s (mm) |
|---|---|---|---|---|
| M3 | 0.5 | 5.7 | 1.65 | 2.0 |
| M4 | 0.7 | 7.6 | 2.20 | 2.5 |
| M5 | 0.8 | 9.5 | 2.75 | 3.0 |
| M6 | 1.0 | 10.5 | 3.30 | 4.0 |
| M8 | 1.25 | 14.0 | 4.40 | 5.0 |
| M10 | 1.5 | 17.5 | 5.50 | 6.0 |
| M12 | 1.75 | 21.0 | 6.60 | 8.0 |
| M16 | 2.0 | 28.0 | 8.80 | 10.0 |
Dimensional requirements may vary according to the applicable standard, specification or custom drawing.
Grade 2
Grade 5 (Ti-6Al-4V)
Metric Coarse
Metric Fine
UNC
UNF
ISO 7380-1:2022 — Hexagon Socket Button Head Screws
DIN EN ISO 7380-1:2023 — Hexagon Socket Button Head Screws
ASME B18.3 — Hexagon Socket Button Head Cap Screws (Inch Series)
Custom titanium button head socket bolts can be manufactured in different dimensions, thread configurations, lengths, head dimensions and socket specifications according to your drawings or technical requirements.
Diameter, length and other dimensions can be manufactured according to your requirements.
Metric coarse, metric fine, UNC and UNF thread configurations are available.
Bolt lengths can be produced according to standard specifications or customer requirements.
Head dimensions and hex socket specifications can be customized according to drawings or application requirements.
Natural, polished and anodized finishes are available according to appearance and application requirements.
Non-standard titanium button head socket bolts can be manufactured according to customer drawings, samples and technical specifications.
Material Traceability
Dimensional Inspection
Material Certificates Available
Inspection Records Available
Send us your required size, titanium grade, quantity or drawing for review.
Request a Quote
